Lokbox Synchronizers and DigiConform

Warning: A Synchronizer wired for use with a Lokbox can damage your Digiconform system!

If you have a synchronizer that was previously used with a Lokbox you should NOT connect it to a DigiConorm system directly. Though the plugs look the same, the wiring inside is different. You need to use a cable adapter. Otherwise, you would cause severe damage to both the synchronizer's opt-tach, as well as the card inside the computer the synchronizer is connected to.

You can easily and inexpensively have a cable adapter made. Please see the hardware-page for some more info, or contact us. Wiring info is also on the Wiring Synchronizers page